Drag Tube Gussets

Today the drag tube gussets were installed in the left wing.  The mating surfaces were first sanded remove oxidation and roughen the surface.  The surfaces were then wiped down with acetone to remove residue and any remaining oxidation.  Hysol adhesive was applied to the edges of the gussets, at they were secured in place.  An additional fillet of adhesive along the drag tube and spar joints was applied.  After the epoxy had time to setup a little, the fillets were smoothed with a wet finger for a nice appearance.  Hours: 1.5

Michael smoothing the Hysol Fillets

Fillet at station 6 complete