We noticed that the right (pilot side) door was slightly warped, so we removed the Lexan and bent the frame a little bit to get it back into position. Then we trimmed the clear Lexan sheet for the right door so that it fit nicely against the fuselage.
We did a little bit more (epoxy) finishing work on the cowling, then drilled for 1/4 turn Skybolt fasteners on all the cowling pieces. The fastener bases were riveted in place, and the pins for the mating pieces were attached with clips. We had a couple strange issues with hole placement that we ended up fixing by filling and redrilling a few of the fastener holes. Hours: 16
 |
| Skybolt fasteners riveted in place |
 |
| All cowling pieces attached with Skybolt fasteners |
No comments:
Post a Comment