Saturday, December 2, 2017

Aileron/Flap Mount Bracket

 Holes were cut in the wing trailing edge to accept the Aileron and Flap mounting brackets.  Like on the previous wing, the holes locations were marked and then cut using a vibrating multi-tool.  This left a very narrow hole.  The holes were widened using a Dremel Cutoff wheel followed by round and straight files.

Holes cut in wing Trailing Edge
 We started aligning the the flap and aileron on the wing.  We still have more fidgeting with the location before drilling.  Hours: 3

Aileron/Flap location has begun

No comments: