 |
| Filler work around Aileron Pulley Fabric Plate |
 |
| Right Wingtip Cleco'd on Bottom |
Sunday, February 4, 2018
Filler and Wingtips
Filler and wingtip work continued today. Filler work around the fabric plates and rib-trailing edge interface was finished up. The 1/4" gap between the Aileron and fiberglass wingtip was cut and sanded smooth and flat. Aligned with the aileron in its neutral position, the wingtip was clamped in place and the bottom holes drilled and cleco'd. Hours: 2.5
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment