Using 1-1/2 Punch in three corners |
Wednesday, April 11, 2018
Fuselage Rear Window
We received our 2'x4' sheet of 0.032 Aluminum today from Aircraft Spruce. I traced out the two window panels using the template made earlier. The panels were cut-out using Andy Snips and then cleaned up with the long Vixen File. Once satisfied with the shape, the internal window cutout was traced onto the panels from the template. The three corner arcs are 1.5" diameter and a punch was used to make perfect holes in the corners. Hours: 1
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment