Wednesday, April 18, 2018

Windows and Header Tank


The left rear window plate was drilled and cleco'd in place using the weld-tabs that were installed by the factory.  The right rear window plate was made using the left windows as the template.  Like the previous work, the part was cut out using Andy snips.  The windows cut-out was marked and the corners were punched with 1.5" punch.  The rest of the cuts were done with a Dremel and cut-off wheel.  The edges were cleaned up with files.

Ed has started cutting out aluminum parts for the header tank.  Hours: 2

Both Rear Windows

Right Window Clamped in Place

No comments: